Distributeur hydraulique 31N5-15110 pour midi pelle Hyundai R170W-7

R170W‑7 Control Valve Assy for Hyundai Excavator spare parts 31N5‑15110 Distributor OEM

Product Overview

A wheeled excavator works differently from a crawler: it travels on its own wheels between jobs, shares road space, and often operates in urban areas where repositioning happens dozens of times a day. The Hyundai R170W‑7 is built for exactly that, and its distributor, reference 31N5‑15110, is the block that meters boom, arm, bucket, swing and travel circuits so the machine can work precisely in places where a crawler would tear up the surface.

Wear in this block shows up as imprecision rather than breakdown. The boom sags on a held bucket while the operator sets a pipe or kerb. The arm skips at stroke start. Swing lands short, so the bucket has to be re‑positioned. Travel speed becomes inconsistent, which on a road machine is noticed immediately. All of it comes from oil crossing between circuits past worn spools. This OEM‑grade assembly replaces the block complete with fresh internals set to Hyundai values, so the worn unit comes off and the replacement fits the original port positions.

Core Advantages

1. Precision for work that happens in public view
Roadside and urban jobs are judged on finish and on time. Restored metering keeps the bucket on the operator's line rather than needing a second pass.

2. Travel behaves consistently again
A wheeled machine that varies speed unpredictably is a safety and scheduling problem. Restored circuit isolation keeps travel response even under attachment load.

3. Boom holds while pipes and kerbs are set
Drift on a held load forces constant lever pressure. Fresh spool pairs keep the load steady during placement.

4. Swing placement stops needing correction
Restored isolation ends the overshoot‑and‑hunt habit that costs seconds on every repositioning.

5. OEM‑grade build at practical cost
Dealer assemblies on a wheeled 17‑ton machine are expensive to import. Equivalent clearances and tested settings at a fraction, with tiered pricing for fleets.

Manufacturing & Quality Control

Spool and bore pairs are machined to print tolerance, matched by size, and hand‑run‑in until full‑stroke movement is smooth without binding. Assembled blocks are flow‑tested circuit by circuit with relief and compensator values recorded against R170W‑7 figures; out‑of‑window units are stripped and corrected. Blocks ship internally oil‑fogged, ports capped, and crated on foam.

Frequently Asked Questions

Q1: How do I confirm 31N5‑15110 suits my R170W‑7?
A: Send a photo of the tag on the existing valve with the machine serial number. Build variants exist across the ‑7 wheeled run and we verify before dispatch.

Q2: Is a wheeled machine's valve the same as the crawler equivalent?
A: Not generally. Wheeled platforms differ in travel arrangement and trim. Ordering by model family alone risks a mismatch, which is why we match the tag.

Q3: What symptoms indicate valve wear?
A: Boom drift on held loads, slack at stroke start, inconsistent swing placement, and uneven travel response. A circuit leak test confirms before you commit.

Q4: Can my existing block be rebuilt?
A: If the casting is sound and has never been rebuilt, a kit may restore it. Where several circuits leak, a complete assembly usually gives better value. Photos help us judge.

Q5: What hydraulic servicing accompanies installation?
A: Flush the system, renew the return filter, clean the suction strainer, and refill with specified oil. Contaminated oil damages new clearances quickly.

Q6: What is excluded from warranty?
A: Material and assembly faults are covered. Damage from dirty oil, water ingress, a spool forced against a bind, or reliefs altered outside specification is not. Photograph the crate before opening if damage is visible.