Distributeur hydraulique pour mini-pelle Doosan DH75





Si vous décidez d'acheter un véhicule ou du matériel à bas prix, assurez-vous que vous communiquez avec un vendeur réel. Cherchez autant d'informations sur le propriétaire que possible. Un escroc peut se faire passer pour une société réelle. En cas de doute, contactez-nous en utilisant le formulaire de commentaires afin que nous effectuions un contrôle supplémentaire.
Avant d'effectuer un achat, étudiez attentivement plusieurs offres de vente afin de connaître le coût moyen du modèle de véhicule ou d'équipement que vous avez choisi. Si le prix de l'offre qui vous intéresse est très inférieur aux offres similaires, réfléchissez bien. Une différence de prix considérable peut indiquer la présence de défauts cachés ou une tentative d'escroquerie.
N'achetez pas de produits dont le prix est trop différent du prix moyen de produits similaires.
Ne consentez pas à payer une caution ou une avance douteuse. En cas de doute, n’hésitez pas à demander des précisions, des photos et des documents supplémentaires, vérifier l'authenticité des documents ou encore poser des questions.
C'est l'arnaque la plus répandue. Des vendeurs malhonnêtes peuvent demander une avance sur le montant total pour « réserver » votre achat. De cette manière, ils peuvent recueillir un montant considérable, puis disparaître.
- Faire un prépaiement sur la carte
- N'effectuez pas de prépaiement sans établir de documents confirmant le transfert d'argent si le vendeur vous semble suspect au cours de vos échanges.
- Transfert de l'argent sur le compte séquestre
- Méfiez-vous de ce genre de demandes, il est très probable que vous soyez en train de communiquer avec un fraudeur.
- Virement sur le compte d'une société avec un nom similaire
- Soyez vigilant(e), des fraudeurs peuvent se faire passer pour des entreprises connues en introduisant des modifications mineures dans le nom. Ne transférez pas d'argent en cas de doute sur le nom de l'entreprise.
- Substitution de ses propres coordonnées dans la facture d'une entreprise réelle
- Avant d'effectuer le virement, vérifiez que les coordonnées indiquées sont exactes et qu'elles appartiennent à l'entreprise indiquée.
Coordonnées du vendeur




Product Overview
Many 7‑to‑8 ton machines live a stop‑start existence: they work a few days on a small contract, then sit for weeks because the bigger machine took the main job. That pattern has a hydraulic consequence people rarely consider. A machine that sits drains oil back, seals dry slightly, and the first shift after idling is the one where every weakness shows. If the block is already worn, that first day back is when the boom sag, the slow arm and the missed swing all appear at once — usually in front of a client.
The DH75 uses this hydraulic main valve to divide pump flow among boom, arm, bucket, swing, travel and auxiliary. Once spools and bores are worn, the gap only widens with temperature: fine in the morning, weaker in the afternoon, worse after a long idle. This OEM‑grade assembly replaces the block complete with fresh internals set to working values, so the worn unit comes off and the replacement fits the original port positions.
Core Advantages
1. First shift back behaves like the last one did
A machine kept for small jobs must work immediately when called on. Fresh spools remove the weakness that only appears after idling.
2. Small jobs stop running long
Precision work on a compact machine is measured in centimetres and minutes. Restored metering keeps both where the quote assumed.
3. Loads hold while grade is checked
Drift on a held bucket forces constant lever pressure. Fresh pairs keep the load steady during setting out.
4. Swing placement lands on target
Restored circuit isolation ends the overshoot habit that matters on tight residential and utility sites.
5. OEM‑grade build proportioned to the machine's value
Dealer pricing sits badly against a small machine's worth. Equivalent clearances and tested settings at a fraction.
Manufacturing & Quality Control
Spool and bore pairs are machined to print tolerance, matched by size, and hand‑run‑in until full‑stroke movement is smooth without binding. Assembled blocks are flow‑tested circuit by circuit with relief values logged against platform figures; out‑of‑window units are stripped and corrected. Blocks ship internally oil‑fogged, ports capped, and packed in compact foam‑lined crates.
Frequently Asked Questions
Q1: My listing shows no part number — how do I order?
A: Send clear photos of the existing valve, its tag if present, and the machine serial plate. Section count, porting and mounting pattern identify the variant.
Q2: Why does the machine feel weaker after standing idle?
A: Oil drains back and seals settle. A worn block shows its leakage more clearly on the first shift than on a machine in daily use.
Q3: What other symptoms indicate valve wear?
A: Jerky feathering, inconsistent swing placement, digging that softens as oil warms, and travel that hesitates.
Q4: Can my existing block be rebuilt?
A: If the casting is sound and has never been rebuilt, a kit may restore it. Where several circuits leak, a complete assembly is usually better value. Photos help us judge.
Q5: What hydraulic servicing accompanies installation?
A: Flush the system, renew the return filter, clean the suction strainer, and refill with specified oil. Compact circuits are sensitive to debris.
Q6: What is excluded from warranty?
A: Material and assembly faults are covered. Damage from dirty oil, water ingress, a spool forced against a bind, or reliefs altered outside specification is not. Photograph the packaging before opening if it arrives damaged.