Servomoteur Endress+Hauser i420 mA HART

Assembly: Insert/add-on module for field devices
hardware version: 02.00.00
* HW version: 02.00.00
* Identifiable via serial number: C743E301EDA
Serial number: C743E301EDA
Software version: 02.10.54
* SW version: 02.10.54
The module offered here is a 4…20 mA HART communication interface with the spare part number 71026358It is typically used in conjunction with field devices such as pressure, level, or temperature transmitters and ensures communication between the sensor and the controller via the HART protocol. The system consists of the parts shown in the pictures. The device is used but in very good condition and fully functional.
Advantages:
- Digital communication via HART based on the proven 4…20 mA standard
- Compatible with numerous sensors in process automation
- Resource-saving by reusing industrial electronics
---------------------------------------------------------------
2. General functions
- 4…20 mA output signal with HART communication
- HART module for sensor connection in explosion-proof areas (depending on housing/system)
- Circuit board assembly with pluggable interfaces (for pressure/level transmitters)
- Identifiable by serial number: C743E301EDA
- Version information:
- HW version: 02.00.00
- SW version: 02.10.54
- Dev Rev: 21
---------------------------------------------------------------
3. CO₂ savings
Reusing this HART communication module instead of purchasing a new device results in an estimated CO₂ saving of:
≈ 70 kg CO₂
This corresponds to the CO₂ emissions of a mid-range car on approximately... 400 km Route.